Drying oven


General info

Manufacturer:Heraeus
Model:LUT 6050
Facility:Chair of Materials Science and Nanotechnology
Partner:TU Dresden
Location:BAR S74b

Description

The LUT ovens are designed for drying paint and other coatings where solvents in the air can form explosive atmospheres, where there is a restriction on the maximum quantity of solvent*. The LUT 6050 F is for installation in areas subject to fire hazards, e.g. where laquers are handled. The inner chamber and all fittings are made of 1,4301 stainless steel, and insulating materials are free of surface active substances (no silicone is used). The formation of vapour pockets is avoided by a well directed air supply system, fresh air is filtered and pre-heated before it enters the chamber, a radial fan ensures the heated fresh air and solvent vapours mix efficiently.

Kelvitron® t microprocessor temperature controller
Temperature limit cut-out protects both oven and its load from fires
Optical and acoustic alarms
Ventillation of chamber before heating, controlled air circulation and exhaust air
Digital temperature setting and readjustable door


Standards: IP Protection Class according to DIN EN 40050 Part 1: IP 22 (LUT 6050), IP 54 (LUT 6050 F)
Both models comply with DIN EN 1539


Technical specs

SPECIFICATIONS
Model LUT 6050 LUT 6050 F
Temperature range (°C) Nominal 250 Nominal 250
No. of air changes per hour 4,2 4,2
Capacity (l) 105 105
Convection type Forced convection Forced convection
Shelves supplied (max.) 2 (9) 2 (9)
Max. load per shelf (kg) 15 20
Int. W×D×H (mm) 435×480×500 435×480×500
Ext. W×D×H (mm) 790×730×815 860×730×815
Weight (kg) 80 80
Temperature variation (spatial) (°C) at 250 °C: ±2,0 at 250 °C: ±2,0
Temperature fluctuation (time) (°C) <±0,3 <±0,3
Power consumption 2500 W 2500 W

Drying oven


General info

Manufacturer:Heraeus
Model:LUT 6050
Facility:Chair of Materials Science and Nanotechnology
Partner:TU Dresden
Location:BAR S74b

Description

The LUT ovens are designed for drying paint and other coatings where solvents in the air can form explosive atmospheres, where there is a restriction on the maximum quantity of solvent*. The LUT 6050 F is for installation in areas subject to fire hazards, e.g. where laquers are handled. The inner chamber and all fittings are made of 1,4301 stainless steel, and insulating materials are free of surface active substances (no silicone is used). The formation of vapour pockets is avoided by a well directed air supply system, fresh air is filtered and pre-heated before it enters the chamber, a radial fan ensures the heated fresh air and solvent vapours mix efficiently.

Kelvitron® t microprocessor temperature controller
Temperature limit cut-out protects both oven and its load from fires
Optical and acoustic alarms
Ventillation of chamber before heating, controlled air circulation and exhaust air
Digital temperature setting and readjustable door


Standards: IP Protection Class according to DIN EN 40050 Part 1: IP 22 (LUT 6050), IP 54 (LUT 6050 F)
Both models comply with DIN EN 1539


Technical specs

SPECIFICATIONS
Model LUT 6050 LUT 6050 F
Temperature range (°C) Nominal 250 Nominal 250
No. of air changes per hour 4,2 4,2
Capacity (l) 105 105
Convection type Forced convection Forced convection
Shelves supplied (max.) 2 (9) 2 (9)
Max. load per shelf (kg) 15 20
Int. W×D×H (mm) 435×480×500 435×480×500
Ext. W×D×H (mm) 790×730×815 860×730×815
Weight (kg) 80 80
Temperature variation (spatial) (°C) at 250 °C: ±2,0 at 250 °C: ±2,0
Temperature fluctuation (time) (°C) <±0,3 <±0,3
Power consumption 2500 W 2500 W